Setting Up the HP Scanjet N6010
For Use With Campus Online
| Important It appears that the PageManager software which comes with the scanner is profile sensitive - the settings are saved with a user's log-on. The problem this creates is that each user who logs on to the computer and wants to use the scanner with Campus Online will need to configure the scanner as outlined below. Once done, the settings are saved for that specific user. |
Step 1 - Install the scanner software
Insert the installation CD that comes with the scanner. Follow the instructions that will appear - accept all the
default settings. Remember, do not plug the scanner
into your computer prior to completing the software installation and rebooting
your computer.
When prompted, be friendly to the environment and to the
HISD budget and select the energy-saving option...
Step 2 - Configuring the scanner after installation - Scan Settings
Once you have restarted your computer and attached the scanner using the provided USB cable, open the scanner software (PageManager).
From the Tools menu
select Scan Settings...
Match all the settings shown in the image below. The custom setting under
the Scan Size: should be 8.50 inches by 11.00
inches. Any incorrect setting may prevent the accurate
scoring of answer documents. Click OK when you have finished adjusting the settings.
In order to set the folder into which the scans produced by the scanner
should be placed, in the folder list in the left panel seen below find Local Disk (C:) > Program
Files > TeachersWorkbench and then
click once, to highlight, the Scanned_Answersheets folder. The next time you open the software (or press the scan button
- see below) the program will remember the folder you have selected. You
will need to reset the folder if for some reason you change the scanning
target folder.
Step 3 - Configuring the scanner after installation - Presto! Scan Button Settings
For the button on the front of the scanner to work correctly make sure to adjust your settings as detailed below.
From the Tools menu
select Presto! Scan Button Settings...
Match all the settings shown in the image below. Click OK
when you have finished adjusting the settings.
That's it!
Now you can place answer documents face down in the scanner feed and
press the upper left button on the front of the scanner to start the scanning. You do not even need to open the scanner software prior to scanning.
© 2006 - 2008, The Central Region
- Houston ISD. All rights reserved.
| It is the policy of the Houston Independent School District not to discriminate on the basis of age, color, handicap or disability, ancestry, national origin, marital status, race, religion, sex, veteran status, or political affiliation in its educational or employment programs and activities. |